Related Experiment Video
Updated: Aug 9, 2025

Designed for Molecular Recycling: A Lignin-Derived Semi-aromatic Biobased Polymer
Published on: November 30, 2020
Novel hierarchical carbon microspheres@layered double hydroxides@copper lignosulfonate architecture for polypropylene
Lei Wang1, Kun Wu1, Chi-Jie Ding1
1School of Chemical Engineering, Xiangtan University, Xiangtan 411105, Hunan, China.
Abstract:
Due to the inherent defect of flammability of polypropylene (PP), a novel and highly efficient carbon microspheres@layered double hydroxides@copper lignosulfonate (CMSs@LDHs@CLS) flame retardant was designed and prepared, which was attributed to the strong electrostatic interaction between carbon microspheres (CMSs), layered double hydroxides (LDHs) and lignosulfonate as well as the chelation effect of lignosulfonate on copper ions, and then it was incorporated into the PP matrix. Significantly, CMSs@LDHs@CLS not only observably improved its dispersibility in PP matrix, but also simultaneously achieved excellent flame retardant properties for composites. With the addition of 20.0 % CMSs@LDHs@CLS, the limit oxygen index of CMSs@LDHs@CLS and PP composites (PP/CMSs@LDHs@CLS) reached 29.3 % and achieved the UL-94 V-0 rating. Cone calorimeter tests indicated that the peak heat release rate, total heat release and total smoke production of PP/CMSs@LDHs@CLS composites exhibited declines of 28.8 %, 29.2 % and 11.5 %, respectively, compared with those of PP/CMSs@LDHs composites. These advancements were attributed to the better dispersibility of CMSs@LDHs@CLS in PP matrix and illustrated that CMSs@LDHs@CLS observably reduced fire hazards of PP. The flame retardant property of CMSs@LDHs@CLS might relate to condensed phase flame retardant effect of char layer and catalytic charring of copper oxides.
More Related Videos
08:12Surface Functionalization of Metal-Organic Frameworks for Improved Moisture Resistance
Published on: September 5, 2018
10:44Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for CuII Through Microwave Pre-Pyrolysis
Published on: February 12, 2019