Wetting behavior during impacting bituminous coal surface for dust suppression droplets of fatty alcohol...

The wetting behavior of droplets during impacting coal surface widely exists in the dust control process. Understanding the effect of surfactants on the diffusion of water droplets on coal surface is critical. To study the effect of fatty alcohol polyoxyethylene ether (AEO) on the dynamic wetting behavior of droplets on bituminous coal surface, a high-speed camera is used to record the impact process of ultrapure water droplets and three different molecular weight AEO solution droplets. A dynamic evaluation index, dimensionless spreading coefficient ([Formula: see text]), is used to evaluate the dynamic wetting process. The research results show that maximum dimensionless spreading coefficient ([Formula: see text]) of AEO-3, AEO-6, and AEO-9 droplets is greater than that of ultrapure water droplets. With the increase of impact velocity, the [Formula: see text] increases, but the required time decreases. Moderately increasing the impact velocity is conducive to promoting the spreading of droplets on the coal surface. Below the critical micelle concentration (CMC), the concentration of AEO droplets is positively correlated with the [Formula: see text] and the required time. When the polymerization degree increases, the Reynolds number ([Formula: see text]) and Weber number ([Formula: see text]) of droplets decrease, and the [Formula: see text] decreases. AEO can effectively enhance the spreading of droplets on the coal surface, but the increase in polymerization degree can inhibit this process. Viscous force hinders droplet spreading during droplet interaction with the coal surface, and surface tension promotes droplet retraction. Under the experimental conditions of this paper ([Formula: see text], [Formula: see text]), there is a power exponential relationship between [Formula: see text] and [Formula: see text].