Related Experiment Video
Updated: Aug 9, 2025

Low-cost Custom Fabrication and Mode-locked Operation of an All-normal-dispersion Femtosecond Fiber Laser for Multiphoton Microscopy
Published on: November 22, 2019
Efficient Raman pulse fiber laser pumped by a dissipative soliton resonance pulse near 2 µm
Abstract:
A high-efficiency Raman conversion from 1.987 µm to 2.177 µm is demonstrated experimentally in 45 m GeO2-doped silica fiber, adopting a dissipative soliton resonance (DSR) rectangular pulse as the pump. Over the entire spectral distribution, the spectral purity of the first-order Raman pulse is up to 96.8%, suggesting a nearly complete pump depletion before the onset of cascaded Raman shifts. The corresponding pump-to-Raman conversion efficiency of 67.4% is the highest up to date in this spectral region. Meanwhile, a large Raman pulse energy of 1.03 µJ was obtained at the repetition rate near MHz level, corresponding to 0.893 W average power. In the total output, the Raman-dominated spike has a Full Width Half Maximum (FWHM) of 1.18 ns far narrower than DSR's pulse duration of 10.25 ns. The results indicate that DSR is a promising candidate for developing efficient Raman nanosecond pulse fiber laser in mid-infrared (MIR) region.
Related Concept Videos
Raman Spectroscopy Instrumentation: Overview
The monochromatic laser source, typically using visible or near-infrared radiation, generates a highly focused beam of light. This light interacts with the molecules of the sample, scattering some of the light. Liquid and gaseous samples are usually tested in ordinary glass capillaries, while solids can be analyzed as powders packed in capillaries or as potassium...
Raman Spectroscopy: Overview
However, a small fraction of the scattered light exhibits a frequency shift due to the exchange of energy between the incident photons and...

