Related Experiment Video
Updated: Aug 9, 2025

Fabrication of Flexible Image Sensor Based on Lateral NIPIN Phototransistors
Published on: June 23, 2018
Diverse field-effect characteristics and negative differential transconductance in a graphene/WS2/Au phototransistor
Abstract:
We propose an infrared-sensitive negative differential transconductance (NDT) phototransistor based on a graphene/WS2/Au double junction with a SiO2/Ge gate. By changing the drain bias, diverse field-effect characteristics can be achieved. Typical p-type and n-type behavior is obtained under negative and positive drain bias, respectively. And NDT behavior is observed in the transfer curves under positive drain bias. It is believed to originate from competition between the top and bottom channel currents in stepped layers of WS2 at different gate voltages. Moreover, this phototransistor shows a gate-modulated rectification ratio of 0.03 to 88.3. In optoelectronic experiments, the phototransistor exhibits a responsivity of 2.76 A/W under visible light at 532 nm. By contrast, an interesting negative responsivity of -29.5 µA/W is obtained and the NDT vanishes under illumination by infrared light at 1550 nm. A complementary inverter based on two proposed devices of the same structure is constructed. The maximum voltage gain of the complementary inverter reaches 0.79 at a supply voltage of 1.5 V. These results demonstrate a new method of realizing next-generation two- and three-dimensional electronic and optoelectronic multifunctional devices.
Related Concept Videos
MOSFET: Depletion Mode
The primary characteristic of depletion-mode MOSFETs is their ability to conduct current between the drain and source terminals without gate bias. This inherent conductivity...
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Small-Signal Analysis of MOSFET Amplifiers
Field Effect Transistor

