Related Experiment Video
Updated: Aug 9, 2025

Split Point Analysis and Uncertainty Quantification of Thermal-Optical Organic/Elemental Carbon Measurements
Published on: September 7, 2019
Simultaneous measurement of carbon emission and gas temperature via laser-induced breakdown spectroscopy coupled with
Abstract:
A method, which can accurately measure carbon emission and gas temperature simultaneously in real-time from a laser-induced breakdown spectrum (LIBS) via machine learning, is proposed in this study. In typical, peak intensity ratios had been used to map species concentrations prior to plasma formation, after removing the broadband continuum of the spectrum; however, the dependence of these peak intensity ratios on the concentration changes with the change in gas density. Therefore, considering the fact that the strength and shape of this broadband continuum is a function of the gas density for a given optical setup, we attempted to collect a spectrum by shortening the time delay after the laser fire, such that the spectrum can contain some of the broadband continuum. Since the analytical quantification of this broadband continuum is not trivial, we employed a machine learning approach to acquire a model that simultaneously predicts the gas temperature and CO2 concentration. The predictive performance of the model trained with spectra that contain the broadband continuum was much better than that without it; the gradient-weighted regression activation mapping (Grad-RAM) analysis revealed that the model utilizes the broadband spectrum for temperature prediction and correction of changes in peak intensity due to temperature changes in the concentration prediction process.
More Related Videos
09:40Measurement and Analysis of Atomic Hydrogen and Diatomic Molecular AlO, C2, CN, and TiO Spectra Following Laser-induced Optical Breakdown
Published on: February 14, 2014
13:38Laser-Induced Fluorescence Emission L.I.F.E. as Novel Non-Invasive Tool for In-Situ Measurements of Biomarkers in Cryospheric Habitats
Published on: October 26, 2019
Related Concept Videos
Flame Photometry: Overview
Inductively Coupled Plasma Atomic Emission Spectroscopy: Instrumentation
There are three main types of inductively coupled plasma atomic emission spectroscopy (ICP-AES) instruments: sequential, simultaneous multichannel, and Fourier transform instruments, with the latter being less commonly used....
Gas Chromatography: Types of Detectors-I
TCD is the earliest and most widely used detector that operates by measuring the changes in the thermal conductivity of the carrier gas. When a sample compound enters the detector,...
Gas Chromatography: Types of Detectors-II
Atomic Emission Spectroscopy: Instrumentation
Atomic Absorption Spectroscopy: Instrumentation
The atomizer used in AAS can be either a flame atomizer or an...