Related Experiment Video
Updated: Aug 9, 2025

Applying Dynamic Strain on Thin Oxide Films Immobilized on a Pseudoelastic Nickel-Titanium Alloy
Published on: July 28, 2020
Atomistic Study for the Tantalum and Tantalum-Tungsten Alloy Threshold Displacement Energy under Local Strain
Mohammad Bany Salman1, Minkyu Park1, Mosab Jaser Banisalman1
1Virtual Lab Inc., 38 Wangsimni-ro, Seongdong-gu, Seoul 08826, Republic of Korea.
Abstract:
The threshold displacement energy (TDE) is an important measure of the extent of a material's radiation damage. In this study, we investigate the influence of hydrostatic strains on the TDE of pure tantalum (Ta) and Ta-tungsten (W) alloy with a W content ranging from 5% to 30% in 5% intervals. Ta-W alloy is commonly used in high-temperature nuclear applications. We found that the TDE decreased under tensile strain and increased under compressive strain. When Ta was alloyed with 20 at% W, the TDE increased by approximately 15 eV compared to pure Ta. The directional-strained TDE (Ed,i) appears to be more influenced by complex ⟨i j k⟩ directions rather than soft directions, and this effect is more prominent in the alloyed structure than in the pure one. Our results suggest that radiation defect formation is enhanced by tensile strain and suppressed by compressive strain, in addition to the effects of alloying.
Related Concept Videos
Castigliano's Theorem
Strain-Energy Density
In the elastic region of a material, the relationship between the stress and the strain is linear and follows Hooke's Law. The strain energy density in this...
Thermal Strain
Temperature Dependent Deformation
Strain Energy
Consider a rod that is fixed at one end and subjected to an axial force at the free end. This axial force induces stress within the rod, leading to its elongation. As the axial force increases, so does the elongation of the rod, illustrating a direct relationship between the force applied and the resulting...
Elastic Strain Energy for Normal Stresses
If...

