Evaluation of Thermo-Viscous Properties of Bitumen Concerning the Chemical Composition

The quality of bitumen is standardized by conventional tests. With the development of new techniques, rotational and oscillatory measuring systems are applied to evaluate bitumen under defined geometric, temperature, frequency, stress, and strain conditions that correspond to loads during asphalt production and service. Several studies have focused on determining the effect of composition on bitumen properties at service temperatures. However, there is a lack of information related to the effect of composition on viscosity at higher temperatures, which influences production processes. The different types of bitumen, samples of 50/70, 35/50, 45/80-75, and 25/55-60 bitumen, had different viscosity values in intervals corresponding to a confidence level of 95%. The viscosity-temperature relationship in temperature range of 120 to 180 °C was observed in values of 3.87 and 3.70 for unmodified bitumen and 3.09 and 3.22 for modified bitumen. The effect of differences in SARA fractions content on the variation in viscosity using regression analysis showed the importance of asphaltenes (direct correlation) and aromates (negative correlation) contents for 50/70 bitumen with a coefficient of linear regression above 0.7. In comparison, the strong effect of saturates and asphaltenes (negative correlation) and resins was identified for 45/80-75 bitumen samples with correlation of 0.5 to 0.7.