Related Experiment Video
Updated: Aug 9, 2025

Production and Analysis of Sporosarcina pasteurii Biocement Bricks Using Custom 3D-Printed Molds for Unconfined Compression Tests
Published on: March 7, 2025
Variation Pattern of the Compressive Strength of Concrete under Combined Heat and Moisture Conditions
Ping Li1, Ji Liu1, Shiwei Duan1
1School of Mechanical Engineering, Anhui University of Technology, Maanshan 243032, China.
Abstract:
The compressive strength of concrete is not the same in high temperature humid environments and normal temperature dry environments. In this study, quasi-static uniaxial compression experiments of concrete with different temperatures and water contents were carried out to investigate the variation pattern of the compressive strength of concrete under combined heat and moisture conditions. The results showed that the temperature softening effect and water softening effect of the compressive strength of concrete were coupled with each other. The compressive strength exhibited a variation trend from increase to decrease with the increase in both temperature and water content, and the relations among the heat-moisture coupling factor, temperature, and relative saturation ratio were obtained. The water absorption of concrete after immersion had a more significant effect on the compressive strength than the free water content stored inside the specimen before immersion. The "pseudo-temperature strengthening effect" distinguished the thermodynamic response of immersed concrete from that of dry concrete, and the functional relationships among the heat-moisture coupling factor, temperature, and relative water absorption ratio were established. The evolutionary mechanism of the competition between the microcrack expansion and healing of concrete under combined heat and moisture conditions was revealed.
More Related Videos
07:15A Testing Platform for Durability Studies of Polymers and Fiber-reinforced Polymer Composites under Concurrent Hygrothermo-mechanical Stimuli
Published on: December 11, 2014
10:27A Uniaxial Compression Experiment with CO2-Bearing Coal Using a Visualized and Constant-Volume Gas-Solid Coupling Test System
Published on: June 12, 2019
Related Concept Videos
Relation Between Tensile Strength and Compressive Strength of Concrete
Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
Behavior of Concrete Under Compressive Load
As the concrete specimen fractures under...
Fatigue Strength of Concrete
Tensile Strength Considerations of Concrete
The dimensions and shape of a concrete specimen...
Impact Strength of Concrete