Related Experiment Video
Updated: Aug 8, 2025
A Polymer-based Piezoelectric Vibration Energy Harvester with a 3D Meshed-Core Structure
Published on: February 20, 2019
PVDF/AgNP/MXene composites-based near-field electrospun fiber with enhanced piezoelectric performance for
Cheng-Tang Pan1,2, Karishma Dutt1, Amit Kumar3
1Department of Mechanical and Electro-Mechanical Engineering, National Sun Yat-sen University, Kaohsiung 80424, Taiwan.
Abstract:
336MXenes, as highly electronegative and conductive two-dimensional nanomaterials, are extensively studied for their use in sensors and flexible electronics. In this study, near-field electrospinning was used to prepare a new poly(vinylidene difluoride) (PVDF)/Ag nanoparticle (AgNP)/MXene composite nanofiber film as a self-powered flexible human motion-sensing device. The composite film displayed highly piezoelectric properties with the presence of MXene. Scanning electron microscopy, X-ray diffraction, and Fourier transform infrared spectroscopy revealed that the intercalated MXene in the composite nanofibers was evenly spread out, which not only prevented the aggregation of MXene but also enabled the composite materials to form self-reduced AgNPs. The prepared PVDF/AgNP/MXene fibers displayed exceptional stability and excellent output performance, enabling their use for energy harvesting and powering light-emitting diodes. The doping of MXene/AgNPs increased the electrical conductivity of the PVDF material, improved its piezoelectric properties, and enhanced the piezoelectric constant of PVDF piezoelectric fibers, thereby allowing the production of flexible, sustainable, wearable, and self-powered electrical devices.
