Related Experiment Video
Updated: Aug 8, 2025

Demonstration of Equal-Intensity Beam Generation by Dielectric Metasurfaces
Published on: June 7, 2019
High-Efficiency Wireless-Power-Transfer System Using Fully Rollable Tx/Rx Coils and Metasurface Screen
1Electrical and Computer Engineering Department, University of Florida, Gainesville, FL 32611, USA.
Abstract:
This work presents a high-efficiency reconfigurable wireless-power-transfer (WPT) system using fully rollable Tx/Rx coils and a metasurface (MS) screen working at 6.78 MHz, for the first time. The MS screens are placed between the Tx and Rx to magnify the power-transfer efficiency (PTE) of the WPT system. The proposed MS-based WPT can be rolled down or rolled up as required, which allows end-users to use the space more flexibly. In the measurement results, the PTE of the WPT is improved from 13.32% to 32.49% at a power-transfer distance (PTD) of 40 cm with one MS screen, 5.42% to 42.25% at a PTD of 50 cm with two MS screens, 1.78% to 49% at a PTD of 60 cm with three MS screens, 0.85% to 46.24% at a PTD of 70 cm with four MS screens. The measured PTE results indicate that the demonstrated MS screens are greatly effective for magnifying the PTE and the PTD of the WPT. In addition, the measured PTE results in the misaligned condition verify that the MS screens also help increase the PTE of the WPT even in the misalignment condition.
More Related Videos
11:09Scalable Solution-processed Fabrication Strategy for High-performance, Flexible, Transparent Electrodes with Embedded Metal Mesh
Published on: June 23, 2017
08:17Autonomous and Rechargeable Microneurostimulator Endoscopically Implantable into the Submucosa
Published on: September 27, 2018
Related Concept Videos
Maximum Power Transfer
By substituting the entire circuit with...
Magnetic Field Due to Two Straight Wires
Energy Stored In A Coaxial Cable
In the simplest form, a coaxial cable can be represented by two long hollow concentric cylinders in which the current flows in opposite directions. The magnetic field inside and outside the coaxial cable is determined by using Ampère's law. The magnetic...
Magnetic Field Due To A Thin Straight Wire
Induced Electric Fields: Applications
The Maximum Power Transfer Theorem
The load connected draws the current, and the circuit delivers the power to the load. The alternating current flowing through the load is determined using the rectangular form of voltages, currents, network impedance, and load impedance. The average power delivered to the load is obtained from the product of the square of current and load resistance.