A Combined Physical and Mathematical Calibration Method for Low-Cost Cameras in the Air and Underwater Environment

Low-cost camera calibration is vital in air and underwater photogrammetric applications. However, various lens distortions and the underwater environment influence are difficult to be covered by a universal distortion compensation model, and the residual distortions may still remain after conventional calibration. In this paper, we propose a combined physical and mathematical camera calibration method for low-cost cameras, which can adapt to both in-air and underwater environments. The commonly used physical distortion models are integrated to describe the image distortions. The combination is a high-order polynomial, which can be considered as basis functions to successively approximate the image deformation from the point of view of mathematical approximation. The calibration process is repeated until certain criteria are met and the distortions are reduced to a minimum. At the end, several sets of distortion parameters and stable camera interior orientation (IO) parameters act as the final camera calibration results. The Canon and GoPro in-air calibration experiments show that GoPro owns distortions seven times larger than Canon. Most Canon distortions have been described with the Australis model, while most decentering distortions for GoPro still exist. Using the proposed method, all the Canon and GoPro distortions are decreased to close to 0 after four calibrations. Meanwhile, the stable camera IO parameters are obtained. The GoPro Hero 5 Black underwater calibration indicates that four sets of distortion parameters and stable camera IO parameters are obtained after four calibrations. The camera calibration results show a difference between the underwater environment and air owing to the refractive and asymmetric environment effects. In summary, the proposed method improves the accuracy compared with the conventional method, which could be a flexible way to calibrate low-cost cameras for high accurate in-air and underwater measurement and 3D modeling applications.