Switching boundary estimation and adaptive sliding mode control for the dynamical systems with discontinuity due to
Binghang Xiao1, Jianzhe Huang1, Zhongliang Jing1
1School of Aeronautics and Astronautics, Shanghai Jiao Tong University, Shanghai 200240, China.
Abstract:
Due to the discontinuous physical property of the control actuators, the state space of such a dynamical system is divided into many subdomains. For each subdomain, the flow of such a system is governed by the corresponding subsystem. The state boundary between the adjacent subdomains is called the physical switching boundary. The controller is designed to switch when the subsystem of such a discontinuous dynamical system is switched in order to have the optimum control performance. Since the ambiguity and uncertainty of modeling, the mathematical expressions for describing the discontinuous physical properties of the control actuators may not be accurate. Since the nominal switching boundary where the controller really switches is not exactly the corresponding physical switching boundary, the mismatch between the subsystem and the corresponding controller will occur and it may seriously affect the control performance. Therefore, a boundary estimation algorithm is proposed to estimate the physical switching boundaries based on the model reference control and error backpropagation. The simulation results show that the adaptive sliding mode control with the boundary estimation algorithm has superior control performance and strong robustness to deal with the internal uncertainty, the external interference, and the boundary ambiguity.
More Related Videos
Related Concept Videos
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...
Relation between Mathematical Equations and Block Diagrams
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
Linear Approximation in Time Domain
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length,...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...


