Evaluation of Analyte Transfer between Microfluidic Droplets by Mass Spectrometry

Droplet microfluidics enables high-throughput experimentation and screening by encapsulating chemical and biochemical samples in aqueous droplets segmented by an immiscible fluid. In such experiments, it is critical that each droplet remains chemically distinct. A common approach is to use fluorinated oils with surfactants to stabilize droplets. However, some small molecules have been observed to transport between droplets under these conditions. Attempts to study and mitigate this effect have relied on evaluating crosstalk using fluorescent molecules, which inherently limits the analyte scope and conclusions drawn about the mechanism of the effect. In this work, transport of low molecular weight compounds between droplets was investigated using electrospray ionization mass spectrometry (ESI-MS) for measurement. The use of ESI-MS significantly expands the scope of analytes that can be tested. We tested 36 structurally diverse analytes that were found to exhibit crosstalk ranging from negligible to complete transfer using HFE 7500 as the carrier fluid and 008-fluorosurfactant as a surfactant. Using this data set, we developed a predictive tool showing that high log P and log D values correlate with high crosstalk, and high polar surface area and log S correlate with low crosstalk. We then investigated several carrier fluids, surfactants, and flow conditions. It was discovered that transport is strongly dependent on all of these factors and that experimental design and surfactant tailoring can reduce carryover. We present evidence for mixed crosstalk mechanisms including both micellar and oil partitioning transfer. By understanding the driving mechanisms, surfactant and oil compositions can be designed to better reduce chemical transport for screening workflows.