Related Experiment Video
Updated: Aug 7, 2025

Author Spotlight: Advancements in High-Performance Thermoelectric Thin Films Through Radio Frequency Magnetron Sputtering
Published on: May 17, 2024
Enhanced Thermoelectric Performance of n-Type PbTe via Carrier Concentration Optimization over a Broad Temperature
Binhao Wang1, Haidong Zhao1, Bin Zhang1
1Center for High Pressure Science, State Key Laboratory of Metastable Materials Science and Technology, Yanshan University, Qinhuangdao 066004, Hebei, China.
Abstract:
The optimal carrier concentration of thermoelectric materials increases with increasing temperature. However, conventional aliovalent doping usually provides an approximately constant carrier concentration over the whole temperature range, which can only match the optimal carrier concentration in a narrow temperature range. In this work, n-type indium and aluminum codoped PbTe were prepared with high-pressure synthesis, followed by spark plasma sintering. While Al doping can provide a roughly constant carrier concentration with varying temperatures, In doping can trap electrons at low temperatures and release them at high temperatures, thus optimizing the carrier concentration over a broad temperature range. As a result, both electrical transport properties and thermal conductivity are optimized, and a significantly enhanced thermoelectric performance is achieved in InxAl0.02Pb0.98Te. The optimal In0.008Al0.02Pb0.98Te shows a peak ZT of 1.3 and an average ZT of 1, with a decent conversion efficiency of 14%. Current work demonstrates that optimizing carrier concentration with varying temperatures is effective to enhance the thermoelectric performance of n-type PbTe.
More Related Videos
Related Concept Videos
Types of Semiconductors
P-N junction
Biasing of Metal-Semiconductor Junctions
In Schottky junctions, where the semiconductor is n-type, applying a positive voltage to the metal relative to the semiconductor reduces its Fermi...
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...
Working Principle of BJT
In the PNP configuration, the emitter is heavily doped with positive charge carriers (holes), while the base is lightly doped with negative carriers (electrons). This setup allows for a forward bias across the emitter-base junction,...
Carrier Generation and Recombination
This process is given by the generation rate G and is efficient due to the conservation of momentum between the valence band maximum and conduction band minimum.
Indirect generation involves an...

