Related Experiment Video
Updated: Aug 6, 2025

Simple Methods for the Preparation of Non-noble Metal Bulk-electrodes for Electrocatalytic Applications
Published on: June 21, 2017
Pt-Based Rare Earth Alloy as Efficient and Robust Electrocatalyst for High-Temperature Proton Exchange Membrane Fuel
Jiaqi Lin1, Jun Wang1, Yujie Wu1
1State Key Laboratory of Chem/Bio-Sensing and Chemometrics, Provincial Hunan Key Laboratory for Graphene Materials and Devices, College of Chemistry and Chemical Engineering, Hunan University, Changsha, 410082, P. R. China.
Abstract:
High-temperature proton exchange membrane fuel cells (HT-PEMFCs) are crucial in future energy systems. However, the activity and stability of the electrocatalysts are severely restricted by high temperature and phosphoric acid poisoning. Herein, PtCe alloy as oxygen reduction reaction (ORR) electrocatalyst for HT-PEMFCs exhibits fantastic performance. Ce can increase the electronic density of Pt, weakening phosphoric acid poisoning and improving ORR activity. The optimized electronic structure can also reduce the dipole effect between Pt and O, which suppresses the irreversible oxidation of Pt. Additionally, the dramatically negative heat of formation in PtCe catalyst brings high kinetic barrier of metal diffusion and dissolution. With this electrocatalyst, the HT-PEMFCs show a preeminent peak power of 605 mW cm-2 with 0.3 mgPt cm-2 . After 30000 cycles of accelerated stability test, the peak power density only decreases by 31.6%, achieving the goal of Department of Energy in 2020 (<40% loss).
More Related Videos
06:39Author Spotlight: Design and Evaluation of Au-Electroplated Carbon Fiber Cloth Electrodes for Hydrogen Peroxide Fuel Cells
Published on: October 20, 2023
12:12On the Preparation and Testing of Fuel Cell Catalysts Using the Thin Film Rotating Disk Electrode Method
Published on: March 16, 2018