Sustainable 3D printing of oral films with tunable characteristics using CMC-based inks from durian rind wastes

With the growing interest in environmentally friendly and personalized medicines, new concept for combining three-dimensional printing (3DP) with natural-based biomaterials derived from agro-food wastes has emerged. This approach provides sustainable solutions for agricultural waste management and potential for developing of novel pharmaceutical products with tunable characteristics. This work demonstrated the feasibility of fabricating personalized theophylline films with four different structures (Full, Grid, Star, and Hilbert) using syringe extrusion 3DP and carboxymethyl cellulose (CMC) derived from durian rind wastes. Our findings suggested that all the CMC-based inks with shear thinning properties capable of being extruded smoothly through a small nozzle could potentially be used to fabricate the films with various complex printing patterns and high structural fidelity. The results also demonstrated that the film characteristics and release profiles could be easily modified by simply changing the slicing parameters (e.g., infill density and printing pattern). Amongst all formulations, Grid film, which was 3D-printed with 40 % infill and a grid pattern, demonstrated a highly porous structure with high total pore volume. The voids between printing layers in Grid film increased theophylline release (up to 90 % in 45 min) through improved wetting and water penetration. All findings in this study provide significant insight into how to modify film characteristics simply by digitally changing the printing pattern in slicer software without creating a new CAD model. This approach could help to simplify the 3DP process so that non-specialist users can easily implement it in community pharmacies or hospital on demand.