Fabrication of Swellable Organic-Inorganic Hybrid Polymers for CO2-Assisted Hydration of Propylene Epoxide
Lulu Dang1,2, Huixia Yuan1,2, Binshen Wang3
1Shanghai Key Laboratory of Green Chemistry and Chemical Processes, School of Chemistry and Molecular Engineering, East China Normal University, 3663 North Zhongshan Road, Shanghai 200062, China.
Abstract:
Swelling is a very common phenomenon in organic substances. However, the swelling behaviors of inorganic substances had rarely been reported. In this study, a new type of swellable organic-inorganic hybrid polymer (PIL@CHT) was designed and successfully synthesized through free-radical copolymerization of polymerizable phosphonium ionic liquid monomer and vinyl-functionalized hydrotalcite (CHT). The swelling behaviors of PIL@CHT in various solvents with a wide range of Hansen solubility parameters (δT) were investigated, and PIL@CHT exhibited excellent swellable capacity in the solvents with δT > 24.4 MPa1/2. The swollen state of the hybrid PIL@CHT in water presented a network structure with a diameter of approximately 8-12 μm, and CHT particles were well dispersed to the channel of PIL. PIL@CHT was applied to catalyze the CO2-assisted hydration of propylene oxide (PO), in which a cascade reaction including the cycloaddition of CO2 and PO and the subsequent hydrolysis of propylene carbonate (PC) occurred. PIL@CHT, combining the active sites of PIL and CHT, synergistically catalyzed this cascade reaction and achieved a high yield (93.0%) and selectivity (98.2%) of 1,2-propanediol (1,2-MPG) under a low H2O/PO ratio of 1.5/1. Moreover, the catalyst could be recycled seven times without any significant loss of catalytic activities and had good substrate generality.
More Related Videos
Related Concept Videos
Regioselectivity and Stereochemistry of Acid-Catalyzed Hydration
Olefin Metathesis Polymerization: Ring-Opening Metathesis Polymerization (ROMP)
Cationic Chain-Growth Polymerization: Mechanism
Aldehydes and Ketones with Water: Hydrate Formation
The formation of hydrates is a reversible reaction. Hydrate formation is influenced by steric and electronic factors accompanying the alkyl substituents on the carbonyl group: The rate of hydrate formation increases with a decrease in the number of alkyl groups attached to the carbonyl carbon. Hence,...
Acid-Catalyzed Hydration of Alkenes
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the...


