Laminar flow-based microfluidic systems for molecular interaction analysis-Part 2: Data extraction, processing and...

The rate at which fluorescently-labeled biomolecules, that are flowing at a constant speed in a microfluidic channel, diffuse into an adjacent buffer stream can be used to calculate the diffusion coefficient of the molecule, which then gives a measure of its size. Experimentally, determining the rate of diffusion involves capturing concentration gradients in fluorescence microscopy images at different distances along the length of the microfluidic channel, where distance corresponds to residence time, based on the flow velocity. The preceding chapter in this journal covered the development of the experimental setup, including information about the microscope camera detection systems used to acquire fluorescence microscopy data. In order to calculate diffusion coefficients from fluorescence microscopy images, intensity data are extracted from the images and then appropriate methods of processing and analyzing the data, including the mathematical models used for fitting, are applied to the extracted data. This chapter begins with a brief overview of digital imaging and analysis principles, before introducing custom software for extracting the intensity data from the fluorescence microscopy images. Subsequently, methods and explanations for performing the necessary corrections and appropriate scaling of the data are provided. Finally, the mathematics of one-dimensional molecular diffusion is described, and analytical approaches to obtaining the diffusion coefficient from the fluorescence intensity profiles are discussed and compared.