Improvement in the elution performance of an N,N,N',N-tetraoctyl diglycolamide impregnated extraction chromatography
Youko Takahatake1, Sou Watanabe1, Tsuyoshi Arai2
1Japan Atomic Energy Agency, 4-33, Muramatsu, Tokai-mura, Ibaraki, 319-1194, Japan.
Abstract:
An adsorbent used for the recovery of trivalent minor actinides (MA(III); Am and Cm) from high level liquid waste generated from reprocessing of spent nuclear fuel was subjected to micro-particle induced X-ray emission (micro-PIXE) analysis to improve its elution performance. The experimental adsorbent comprised SiO2 particles, a polymer coating, and an N,N,N',N'-tetraoctyl diglycolamide (TODGA). The particles to be analyzed were subjected to Nd adsorption and an elution operation, but Nd in the adsorbent was found to be uniformly distributed. This might have been caused by individual differences in the amount of impregnated TODGA. The remaining Nd species were not localized to a specific part of the adsorbent after the adsorption operation. Some Nd elements were retained in the adsorbent after elution, probably because of the poor diffusion of the mobile phase inside the adsorbent. An adsorbent having a different microstructure from the first was then evaluated, and rapid elution was observed on new adsorbent along micro-PIXE analysis.
More Related Videos
09:43Study of Short Peptide Adsorption on Solution Dispersed Inorganic Nanoparticles Using Depletion Method
Published on: April 11, 2020
11:14Two-way Valorization of Blast Furnace Slag: Synthesis of Precipitated Calcium Carbonate and Zeolitic Heavy Metal Adsorbent
Published on: February 21, 2017
