Related Experiment Video
Updated: Aug 5, 2025

Removal of Arsenic Using a Cationic Polymer Gel Impregnated with Iron Hydroxide
Published on: June 28, 2019
As(III) removal by a recyclable granular adsorbent through dopping Fe-Mn binary oxides into graphene oxide chitosan
Huimei Shan1, Huinan Mo1, Yunquan Liu1
1Collaborative Innovation Center for Water Pollution Control and Water Safety in Karst Area, Guilin University of Technology, Guilin 541004, China; College of Environmental Science and Engineering, Guilin University of Technology, Guilin 541004, China.
Abstract:
Graphene oxide chitosan composite (GOCS) is recognized as an environmentally friendly composite adsorbent because of its stability and abundant functional groups to adsorb heavy metals, and Fe-Mn binary oxides (FMBO) have attracted increasing interest due to their high removal capacity of As(III). However, GOCS is often inefficient for heavy metal adsorption and FMBO suffers poor regeneration for As(III) removal. In this study, we have proposed a method of dopping FMBO into GOCS to obtain a recyclable granular adsorbent (Fe/MnGOCS) for achieving As(III) removal from aqueous solutions. Characterization of BET, SEM-EDS, XRD, FTIR, and XPS are carried out to confirm the formation of Fe/MnGOCS and As(III) removal mechanism. Batch experiments are conducted to investigate the effects of operational factors (pH, dosage, coexisting ions, etc.), as well as kinetic, isothermal, and thermodynamic processes. Results show that the removal efficiency (Re) of As(III) by Fe/MnGOCS is about 96 %, which is much higher than those of FeGOCS (66 %), MnGOCS (42 %), and GOCS (8 %), and it increases slightly with the increasing molar ratio of Mn and Fe. This is because amorphous Fe (hydro)oxides (mainly in the form of ferrihydrite) complexation with As(III) is the major mechanism to remove As(III) from aqueous solutions, and it is accompanied by As(III) oxidation mediated by Mn oxides and the complexation of As(III) with oxygen-containing functional groups of GOCS. Charge interaction plays a weaker role in As(III) adsorption, therefore Re is persistently high over a wide range of pH values of 3-10. But the coexisting PO43- can greatly decrease Re by 24.11 %. As(III) adsorption on Fe/MnGOCS is endothermic and its kinetic process is controlled by pseudo-second-order with a determination coefficient of 0.95. Fitted by the Langmuir isotherm, the maximum adsorption capacity is 108.89 mg/g at 25 °C. After four times regeneration, there is only a slight decrease of <10 % for the Re value. Column adsorption experiments show that Fe/MnGOCS can effectively reduce As(III) concentration from 10 mg/L to <10 μg/L. This study provides new insights into binary polymer composite modified by binary metal oxides to efficiently remove heavy metals from aquatic environments.
More Related Videos
10:44Preparation of Biomass-based Mesoporous Carbon with Higher Nitrogen-/Oxygen-chelating Adsorption for CuII Through Microwave Pre-Pyrolysis
Published on: February 12, 2019
08:34A Dual-Functional Electroactive Filter Towards Simultaneously SbIII Oxidation and Sequestration
Published on: December 5, 2019
Related Concept Videos
Extraction: Advanced Methods
Precipitation and Co-precipitation