On the Mechanical Behaviour of Biomimetic Cornstalk-Inspired Lightweight Structures

This paper presents an investigation on the stiffness and energy absorption capabilities of three proposed biomimetic structures based on the internal architecture of a cornstalk. 3D printing was used to manufacture specimens using a tough and impact-resistant thermoplastic material, acrylonitrile butadiene styrene (ABS). The structural stiffness, maximum stress, densification strain, and energy absorption were extracted from the compression tests performed at a strain rate of 10^-3 s^-1. A numerical model was developed to analyse the behaviour of the biomimetic structures under compression loading. Further, a damage examination was conducted through optical microscopy and profilometry. The results showed that the cornstalk-inspired biomimetic structure exhibited a superior specific energy absorption (SEA) capability that was three times higher than that of the other core designs as reported in the literature.