Study on the Evolution of Physical Parameters and Dynamic Compression Mechanical Properties of Granite after...

The study of the evolution law of basic physical parameters and dynamic compression performance of deep granite under the environment of the heating-cooling cycle is of great significance for the stability evaluation of deep underground engineering and the development of deep resources. In this study, heating-cooling cycle tests and dynamic compression tests were conducted on a large number of fine-grained granite specimens with heating temperatures from 200 to 600 °C and times from one to twenty times using a box-type high-temperature muffle furnace and Hopkinson pressure bar (SHPB) test system, and the evolution law of basic physical parameters and dynamic compression mechanical properties of fine-grained granite were studied using theoretical and fitting analysis. The test results showed that: the changes of the basic physical parameters of granite have obvious temperature effect; 600 °C is a threshold value for the changes of each physical parameter of granite; the sensitivity of each physical parameter to the number of heating and cooling cycles is small before 600 °C; and the sensitivity of each physical parameter to the number of heating and cooling cycles significantly increases at 600 °C. The dynamic compressive strength and elastic modulus of granite decreased with the increase in heating and cooling cycles, and the maximum decrease rate was 89.1% and 85.9%, respectively, and the strain rate linearly increased with the increase in heating and cooling cycles, and the maximum strain rate was 123 s^-1. The temperature, the number of heating and cooling cycles, and the impact air pressure, all had significant effects on the damage mode and crushing degree of granite.