Related Experiment Video
Updated: Aug 5, 2025

Protocol for Measuring the Thermal Properties of a Supercooled Synthetic Sand-water-gas-methane Hydrate Sample
Published on: March 21, 2016
Study on the Influence of Saturation on Freeze-Thaw Damage Characteristics of Sandstone
Xinlei Zhang1, Jiaxu Jin1,2, Xiaoli Liu3
1School of Civil Engineering, Liaoning Technical University, Fuxin 123000, China.
Abstract:
In order to explore the evolution mechanism of freeze-thaw disasters and the role of water in the freezing-thawing cycles of rocks, the macro mechanical indexes and microstructural characteristics of seven different saturation sandstones after certain freeze-thaw cycles were analyzed. Electron microscope scanning, nuclear magnetic resonance, and uniaxial compression tests were employed to study the migration law of water in the rock, the crack growth law, and the damage mechanism during freeze-thaw cycles. The results showed that when the saturation was 85%, the peak load curve of sandstone with different saturation appeared at the minimum point, and the porosity of sandstone reached the maximum. The damage variable increased sharply when the saturation was 75-85%. This proves that 85% saturation is the critical value of sandstone after five freeze-thaw cycles. The water migration freezing model is established, and the migration direction of capillary film water during freezing is micropore → mesopore → macropore. The migration of water is accompanied by the expansion and generation of cracks. Then we study the mechanism and law of crack expansion, and the crack propagation rate is positively related to the theoretical suction. The theoretical suction and theoretical ice pressure increased linearly with the decrease in temperature, which accelerated the crack propagation. The crack propagation rate in decreasing order is V > V > V. The research results can provide a theoretical basis for evaluating the stability of rocks under the action of freeze-thaw cycles in cold regions.
Related Concept Videos
Frost Action on Concrete
This freeze-thaw cycle primarily causes surface scaling, where...
Unsoundness of Aggregate due to Volume Change
Frost Resistant Concrete
Introducing microscopic air bubbles into the concrete mix through air entrainment creates small voids that accommodate ice expansion, thereby reducing internal pressures and preventing cracking. The optimal amount of...
Effect of Sea Water on Concrete
Concrete in areas between tide marks,...
Brick Durability, Strength, and Appearance
Sulfate Attack on Concrete
Sulfates from sources like soil, groundwater, or industrial effluents...

