The Effect of Various Fillers on the Properties of Methyl Vinyl Silicone Rubber

Silicone rubber (SIR) has been widely used in electrical insulation fields, and the introduction of new materials is very important for the performance improvement of SIR composites. In this work, four different fillers, including aluminium hydroxide (ATH), yimonite (YMT), boron nitride (BN) and mica-filled SIR composites were prepared, and the vulcanization behavior, mechanical properties, insulation performance and hydrophobicity of the SIR composites were investigated and compared. Both BN- and mica-filled SIR composites showed excellent insulation performance, while the ATH-filled SIR composite exhibited the best mechanical properties with an elongation at break of 230% and a tensile strength of 2.9 MPa. The SIR/BN composite showed a breakdown strength of 29.2 kV/mm with a 5% failure rate. The addition of YMT deteriorated the insulation performance of SIR but improved the elongation at break and hydrophobicity, with an elongation at break increasing from 115% to 410% and the static contact angle improving from 109.8° to 115.6°.