Related Experiment Video
Updated: Aug 4, 2025

A Structured Rehabilitation Protocol for Improved Multifunctional Prosthetic Control: A Case Study
Published on: November 6, 2015
Finite-Time Continuous Nonsingular Terminal Modified Adaptive-Gain Super-Twisting Control: Application to a 2-DOF
Abstract:
This article proposes finite-time continuous nonsingular terminal modified adaptive-gain super-twisting control (FT-CNT-MAG-STC) for the second-order disturbed systems. Compared with existing sliding-mode controllers, the noteworthy improvements of the proposed framework are the fast finite-time convergence, continuous control signal, ease-of-implementation feature, and relaxation of the assumption related to the information on the bounds of the disturbance and its derivative. In the proposed framework, a fast nonsingular terminal sliding surface is first developed such that the singularity problem is avoided and the convergence rate is improved. Then, we design a continuous modified super-twisting algorithm with an adaptive gain, under which the need for the bounds information of the disturbance and its derivative is relaxed and the performance of the closed-loop system is enhanced. Rigorous analysis is provided to prove the finite-time convergence of the system states to small regions containing the origin. We apply the proposed framework to the position control for a 2-DOF planar robot manipulator system. Various experimental results are illustrated to evaluate the effectiveness of the designed position controller.
Related Concept Videos
One-Degree-of-Freedom System
A one-degree-of-freedom system is defined by an independent variable that determines its state and behavior. One example of a one-degree-of-freedom system is a simple harmonic oscillator, such as a...
Controller Configurations
Control-system compensation involves various configurations, most commonly series or cascade compensation, in which the controller...
Linear Approximation in Time Domain
For a simple pendulum with a mass evenly distributed along its length and the center of mass located at half the pendulum's length,...
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
Open and closed-loop control systems
An open-loop control system operates without feedback from the output. It consists of two primary elements: the controller and the controlled process. The controller receives an input signal...
Feedback control systems
Linear feedback systems are theoretical models that simplify analysis and design. These systems operate under the principle that their output is directly proportional to their input within certain ranges. For instance, an amplifier in a control system behaves linearly as long as the input signal remains within a specific range. However, most physical systems exhibit inherent nonlinearity...

