Photoelectrocatalytic peroxymonosulfate activation over CoFe₂O₄-BiVO₄ photoanode for environmental purification:...

This work reported on the development of CoFe₂O₄-BiVO₄ photoanode based photoelectrocatalytic system collaborating with peroxymonosulfate activation for organic contaminants removal. CoFe₂O₄ layer not only provided active sites for direct peroxymonosulfate activation but also accelerated charge separation process for the enhancement of photocurrent density and photoelectrocatalytic performance. Junction of CoFe₂O₄ layer on BiVO₄ photoanode led to the improvement of photocurrent density to 4.43 mA/cm² at 1.23 V_RHE, which was approximately 4.06 times higher than that of pure BiVO₄. Subsequently, the corresponding optimal degradation efficiency toward the tetracycline model contaminant achieved to be 89.1% with total organic carbon removal value of about 43.7% within 60 min. Moreover, the degradation rate constant of CoFe₂O₄-BiVO₄ photoanode in photoelectrocatalytic system was 0.037 min^-1, which was about 1.23, 2.64 and 3.70 times higher than the values in photocatalysis, electrocatalysis and PMS only based systems, respectively. In addition, radical scavenging experiments and electron spin resonance spectra indicated a synergy of radical and nonradical coupling process where •OH and ¹O₂ played vital roles during tetracycline degradation. Plausible photoelectrocatalytic mechanism and degradation pathway were proposed. This work provided an effective strategy to construct peroxymonosulfate assisted photoelectrocatalytic system toward green environmental applications.