Optimization of Precious Metals Recovery from Electronic Waste by Chromobacterium violaceum Using Response Surface
Wan Nur Fazlina Abdol Jani1, Fatihah Suja'2, Sharifah Iziuna Sayed Jamaludin1
1School of Chemical Engineering, College of Engineering, Universiti Teknologi MARA Johor Branch, Pasir Gudang Campus, 81750 Bandar Seri Alam, Masai, Johor, Malaysia.
Abstract:
An effective recovery technology will be valuable in the future because the concentration of the precious metal contained in the source can be a key driver in recycling technology. This study aims to use response surface methodology (RSM) through Minitab software to discover the optimum oxygen level (mgL-1), e-waste pulp density (% w/v), and glycine concentration (mgL-1) for the maximum recovery of gold (Au) and silver (Ag). The method of precious metals recovery used for this study was taken from the bioleaching using 2 L of batch stirred tank reactor (BSTR). A Box-Behnken of RSM experimental statistical designs was used to optimize the experimental procedure. The result of the RSM optimization showed that the highest recovery was achieved at an oxygen concentration of 0.56 mgL-1, a pulp density of 1.95%, and a glycine concentration of 2.49 mgL-1, which resulted in the recovery of 62.40% of Au. The pulp density and glycine concentration greatly impact how much Au is bioleached by C. violaceum. As a result, not all of the variables analyzed seem crucial for getting the best precious metals recovery, and some adjustments may be useful in the future.
