Partial nitritation and nitrogen removal of vacuum toilet wastewater from high-speed trains in a sequential batch...

Owing to the high contents of organics and nitrogen in vacuum toilet wastewater (VTW) generated from high-speed trains, onsite pretreatment is usually required before VTW can be discharged into municipal sewers. In this study, a partial nitritation process was stably established in a sequential batch reactor to efficiently utilize the organics in synthetic and real VTWs for nitrogen removal and to produce an effluent suitable for anaerobic ammonia oxidation. In spite of the high fluctuations of COD and nitrogen in VTW, the organics used for nitrogen removal stabilized at 1.97 ± 0.18 mg COD mg N^-1 removed, and the effluent NO₂^--N/NH₄⁺-N ratios were maintained at 1.26 ± 0.13. The removal efficiencies of nitrogen and COD were 31.8 ± 3.5% and 65.2 ± 5.3% under the volumetric loading rates of 1.14 ± 0.15 kg N m^-3 d^-1 and 1.03 ± 0.26 kg COD m^-3 d^-1 for real VTW, respectively. Microbial community analysis revealed that Nitrosomonas (0.95%-1.71%) was the dominant autotrophic ammonium-oxidizing bacterial genus, but nitrite-oxidizing bacteria, Nitrolancea, was severely inhibited, with a relative abundance less than 0.05%. The relative abundance of denitrifying bacteria increased by 7.34% when the influent was switched to real VTW. Functional profile predictions of the biomass showed that the decrease in the COD/N ratio and the switch of reactor influent from synthetic to real VTW increased the relative abundance of enzymes and modules involved in carbon and nitrogen metabolisms.