Carbonic Anhydrase-Embedded Hydrogen-Bonded Organic Frameworks Coating for Facilitated Offshore CO₂ Fixation

Exhausted emission of carbon dioxide (CO₂ ) from ships or offshore platforms has become one of the major contributors to global carbon emissions. Enzymes such as carbonic anhydrase (CA) have been widely used for CO₂ mineralization because of their high catalytic rate. However, CA in seawater is easy to inactivate and difficult to reuse. Immobilization would be a feasible solution to address the stability issue, which, however, may cause an increase of internal diffusion resistance and reduced catalytic activity. In this regard, design of high-performance biocatalysts for acquiring high catalytic activity and stability of CA is highly desirable. Herein, a monolithic catalyst of Filler-CA@Lys-HOF-1 (FCLH) was prepared by chemical sorption of CA on the surface of the Filler followed by the coating of Lys-HOF-1. The highest catalytic activity of FCLH was obtained by regulating the amount of HOF-1 monomer added. Due to the protection of Lys-HOF-1, the FCLH showed good tolerance against acidity and salinity, which could retain about 80.2 % of the original activity after 9 h incubation in simulated seawater. The catalytic activity of FCLH could retain 85.4 % of the initial activity after 10 cycles. Hopefully, our study can provide a promising biocatalyst for CO₂ mineralization, which may drive down carbon emissions when used for CO₂ capture and conversion on offshore platforms.