Related Experiment Video
Updated: Aug 3, 2025

Synthesis and Functionalization of 3D Nano-graphene Materials: Graphene Aerogels and Graphene Macro Assemblies
Published on: November 5, 2015
Study on the damage resistance and deterioration behavior of GO concrete under the harsh environment
Chengqin Chen1,2, Wei Zhang1, Hongjuan Wu1
1School of Civil Engineering, Northwest Minzu University, Lanzhou, China.
Abstract:
To exploretheeffects of physical, mechanical, anti-deterioration properties of graphene oxide (GO) on cement-based cementitious materials, GO sheet dispersions areprepared by the improved Hummers method and ultrasonic dispersion method. The influence of theGO content on the compressive and flexural strengths of cement paste is investigated, and the penetration process of chloride ions in graphene oxide concrete is discussed by the electric accelerated erosion method. Combined with the rapid freeze-thaw test, the deterioration of graphene oxide concrete ismethodically analyzed. Theobtained results reveal that an appropriate amount of GO improves both the compressive and flexural strengths of cement pastev. In the chloride environment, the chloride diffusion coefficient of 0.03% GO concrete is 18.75% less than that of ordinary concrete.Under the action of freeze-thaw cycles, with the increase of salt freezing times, the deterioration mode of GO concrete is a combination of mortar shedding, micro-crack expansion, denudation, and block shedding; The stress-strain curve of the specimen tends to be flat with the growth of salt freezing times. The peak stress gradually lessens, the peak strain gradually grows, and the elastic modulus remarkably reduces. Compared with ordinary cement paste, theGO is capable of promoting the growth of cement paste hydration crystals, changing the size and shape of crystals, and realizingthe regulation of cement paste microstructure. Incorporating an appropriate amount of theGO could promote the cement hydration process and enhance the chemical water-binding amount in the cement paste. The optimal GO content is reported to be 0.03% of the cement mass.
Related Concept Videos
Abrasion Resistance of Concrete
One such test is the revolving disc test, where three plates...
Sulfate Attack on Concrete
Sulfates from sources like soil, groundwater, or industrial effluents...
Effect of Sea Water on Concrete
Concrete in areas between tide marks,...
Behavior of Concrete Under Compressive Load
As the concrete specimen fractures under...
Acid Attack on Concrete
The rate at which hydrogen...
Frost Action on Concrete
This freeze-thaw cycle primarily causes surface scaling, where...

