Influence of the Scatter Index of Non-Metallic Inclusions in Structural Steel on the Fatigue Resistance Coefficient

One of the main parameters characterizing steel is tensile strength. Conducting actual research is time consuming and expensive. For this reason, the technique uses simplified methods that allow one to quickly estimate the resistance of the material to fatigue. They are conducted mainly by computer methods. For the proper development of programs to determine the fatigue parameters of steel, solid data preparation is necessary. Unfortunately, some studies are performed on materials produced in laboratory conditions, which is only an approximation of the actual production conditions. Real alloys contain natural impurities which can affect their properties. Therefore, it is important to use real results obtained on an industrial scale for analysis including computer simulations. One of the important parameters that can be used to describe the properties of steel is the scatter index. It is the quotient of the average distance between the pollution and the average size of the pollution. This parameter makes it possible to take into account the fatigue strength of steel, taking into account the size of impurities and the distance between these impurities. The paper attempted to determine the scatter index and its impact on the fatigue resistance coefficient for steel melted in an industrial 140 ton electric furnace. The tests were carried out on structural steel with an average carbon content of 0.26%. The steel was hardened and tempered in all temperature tempering ranges (low, medium, and high). The fatigue resistance coefficient in the scatter index function was determined and discussed for each of the applied heat treatment parameters.