Design, Manufacturing and Acoustic Assessment of Polymer Mouthpieces for Trombones

Brass instruments mouthpieces have been historically built using metal materials, usually brass. With the auge of additive manufacturing technologies new possibilities have arisen, both for testing alternative designs and for using new materials. This work assesses the use of polymers for manufacturing trombone mouthpieces, specifically PLA and Nylon. The acoustical behavior of these two mouthpieces has been compared with the obtained from a third one, built from brass. Both additive and subtractive manufacturing techniques were used, and the whole manufacturing process is described. The mouthpieces were acoustically assessed in an anechoic chamber with the collaboration of a professional performer. The harmonic analysis confirmed that all the manufactured mouthpieces respect the harmonic behavior of the instrument. An energy analysis of the harmonics revealed slight differences between the mouthpieces, which implies differences in the timbre of the instrument. Although these subtle differences would not be acceptable when performing with the instrument in an orchestra, they could be perfectly valid for early learners, personal rehearsals or any kind of alternative performance.