Study on Improving Measures of Mechanical Properties of Geopolymer Materials and Its Effect on CO₂ Emission

Using construction and demolition waste composites (CDWC) and fly ash (FA) to replace cement to produce concrete can reduce CO₂ emissions. However, the CDWC-based geopolymer materials have two imperfections: the compressive strength is prone to decrease with the increase of curing age (strength shrinkage) under heat curing conditions, and the strength develops slowly under ambient curing conditions. To solve the problems of these materials, on the one hand, we designed an experiment of preparing CDWC-based geopolymer concrete (CDWGC) with pretreated CDWC at different high temperatures. We analyzed the influence of different pretreatment temperatures on the mechanical properties of CDWGC through compressive strength, SEM-EDS and XRD. On the other hand, we added CaO to improve the mechanical properties of CDWC-based geopolymer paste (CDWGP) under ambient curing conditions. Further, the CO₂ emissions of pretreating CDWC and adding CaO were calculated by life cycle assessment (LCA). The results show that: (1) Pretreatment of CDWC can effectively solve the problem of CDWGC strength shrinkage. (2) The compressive strength of CDWGP cured at ambient can be significantly improved by adding CaO, and the compressive strength can be increased by 180.9% when the optimum content is 3%. (3) Adding CaO had less impact on CO₂ emissions, a low-carbon way to improve its strength effectively.