Stress Distribution in Peri-implant Bone in the Replacement of Molars with One or Two Implants: A Finite Element...

In most cases, insertion of single implants with a standard diameter is used to replace a molar tooth but placing two implants with a narrow diameter seems to be a viable treatment modality to withstand functional and biomechanical forces.

This study aimed to evaluate and compare stress distribution in the bone surrounding a single molar area rehabilitated by a single implant versus two implants with a narrow diameter.

The study was conducted by computer-aided in vitro modeling. The initial model used a single implant, 4.8 mm wide in diameter, inserted with a 3.9-mm distance from both sides and 12.6-mm mesiodistal space. The second model used two 3.3-mm narrow-sized implants with a 3-mm distance from one another, 1.5 mm from both sides, and a 12.6-mm mesiodistal space. Following the completion of these models, a 100-N force was exerted obliquely, once in three locations and once in the mesial aspect of the implant-supported crown. Stress distribution was then measured using finite element analysis (FEA) with ANSYS Workbench software package in both models.

The maximum stress in the bone around the single implant was less than that around double implants. The maximum stress of cortical bone in three-point loading was lower than mesial loading either in one (146.7 vs. 126.72 MPa) or two implants model (186.8 vs. 139.24).

According to the results, because of more cortical bone contact area, the stress of surrounding bone in wide implant was decreased.