Full-order adaptive sliding mode control with extended state observer for high-speed PMSM speed regulation
Meng Luo1, Zhichun Yu2, Yang Xiao2
1Intron Technology (Shanghai) Co., Ltd., Shanghai, 201203, China. luomeng@g-pulse.net.
Abstract:
In order to achieve speed control of high-speed permanent magnet synchronous motor with high precision, the sliding mode control (SMC) is usually adopted. However, the inherent chattering phenomenon affects the speed control performance. In order to solve this problem, a composite speed regulator is proposed in this paper, which is made up of two parts: the adaptive full-order SMC and extended state observer (ESO). Switching gain adaption law is proposed for minimizing chattering as much as possible while ensuring the robustness of sliding mode control. The total disturbance is estimated by the ESO and through feedforward, thus improving the system anti-disturbance ability. Finally, the effectiveness of the proposed speed regulator has been validated in the test bench.
More Related Videos
09:01Gain-compensation Methodology for a Sinusoidal Scan of a Galvanometer Mirror in Proportional-Integral-Differential Control Using Pre-emphasis Techniques
Published on: April 4, 2017
11:44Real-Time DC-dynamic Biasing Method for Switching Time Improvement in Severely Underdamped Fringing-field Electrostatic MEMS Actuators
Published on: August 15, 2014
Related Concept Videos
Time-Domain Interpretation of PD Control
Consider the example of control of motor torque. Initially, a positive...
PD Controller: Design
Designing a continuous-data controller requires selecting and linking components like adders and integrators, which are fundamental in Proportional,...
Frequency-Domain Interpretation of PD Control
The proportional control gain, combined with the...
PID Controller
Simplified Synchronous Machine Model
In this model, each generator is connected to a...
Multimachine Stability
In analyzing the system, the nodal equations represent the relationship between bus voltages, machine voltages, and machine currents. The nodal equation is given by:
