The dosimetric underpinning of bladder filling criteria for prostate image-guided volumetric modulated arc therapy

Repeated CT simulation imaging is common at our institution due to failure to achieve acceptable bladder filling in patients undergoing prostate radiotherapy. There is operational value in re-assessing the validity of the bladder filling assessment criteria by comparing the quality of two plans optimized based on either an "Accepted" or "Rejected" bladder status.

Twenty prostate patients with repeated CT simulation imaging were included. For each patient, a VMAT plan created using the "Rejected" bladder was compared with the "Accepted" bladder plan. Then, delivered dose to bladder was estimated using ≥4 CBCTs to measure number of fractions with major bladderdose violation (>5% difference) for both plans. Bladder heights of fractions without major bladder dose violations were compared to those with a violation to determine a threshold height for bladder filling acceptability.

Using the "Accepted" bladder plans for treatment resulted in 30/175 fractions with major dose violations. These 30 bladders were significantly shorter than those without major violation (mean 28 vs 43mm, p < 0.05). The "Rejected" bladder plans delivered a lower dose to the bladder by ≥5% than the '"Accepted" bladder plans in 59% of fractions, and the number of fractions with major dose violations was 17.

Using a shorter bladder for plan optimization resulted in better bladder sparing during treatment and improved compliance to protocol specific bladder dose constraints. A bladder height range of 20-40 mm measured between the bladder dome and the superior aspect of the symphysis pubis is recommended for prostate radiotherapy requiring a full bladder protocol.

Using real patient data from simulation and treatment, this study established a range of bladder height that can be measured easily in a clinical setting for assessing adequacy of bladder filling for prostate radiotherapy.