Related Experiment Video

Updated: Aug 1, 2025

Experimental Investigation of the Flow Structure over a Delta Wing Via Flow Visualization Methods
09:17

Experimental Investigation of the Flow Structure over a Delta Wing Via Flow Visualization Methods

Published on: April 23, 2018

10.8K

Aerodynamic Evaluation of Flapping Wings with Leading-Edge Twisting

Lung-Jieh Yang1, Vivek Jabaraj Joseph1, Yuan-Lung Lo2

  • 1Department of Mechanical and Electro-Mechanical Engineering, Tamkang University, Tamsui, New Taipei City 25137, Taiwan.

Biomimetics (Basel, Switzerland)
|April 24, 2023
PubMed

Keywords:
3D printingKwon3DMATLABbevel gearsflapping mechanismflapping wing micro aerial vehicle (FWMAVs)leading-edge twisting

More Related Videos

Flapping Soft Fin Deformation Modeling using Planar Laser-Induced Fluorescence Imaging06:20

Flapping Soft Fin Deformation Modeling using Planar Laser-Induced Fluorescence Imaging

Published on: April 28, 2022

2.2K
Investigating the Three-dimensional Flow Separation Induced by a Model Vocal Fold Polyp09:58

Investigating the Three-dimensional Flow Separation Induced by a Model Vocal Fold Polyp

Published on: February 3, 2014

8.5K

Related Concept Videos

Lift01:23

Lift

Lift is a fundamental aerodynamic force that acts perpendicular to the direction of airflow. It plays a central role in achieving and sustaining flight and in stabilizing various vehicles. Lift primarily originates from pressure differences created across surfaces, such as an airfoil. A lower pressure region forms above the wing, while a higher pressure region forms below it, generating an upward force. This differential results from the shape and orientation of the airfoil, enabling the wing...
208
Angle of Twist: Problem Solving01:13

Angle of Twist: Problem Solving

An electric motor applies a torque of 700 N·m to an aluminum shaft, triggering a stable rotation. Two pulleys, B and C, are subjected to torques of 300 N·m and 400 N·m, respectively. The modulus of rigidity is provided as 25 GPa. With the knowledge of the length and diameter of each segment, the twist angle between the two pulleys can be computed. First, a section cut is made between pulleys B and C, and the cut cross-section is analyzed using a free-body diagram. Given that the...
353
Angle of Twist - Elastic Range01:13

Angle of Twist - Elastic Range

Consider a cylindrical shaft with a length denoted by L and a consistent cross-sectional radius referred to as r. This shaft undergoes a torque at the free end. The highest shearing strain within the shaft is directly proportional to the twist angle and the radial distance from the shaft axis. When the shaft behaves elastically, this shearing strain can be articulated using variables such as the applied torque, radial distance, the polar moment of inertia, and the modulus of rigidity. By...
364
Turbulent Flow01:24

Turbulent Flow

Turbulent flow is characterized by unpredictable fluctuations in velocity and pressure, which result in a chaotic fluid movement distinct from the orderly patterns of laminar flow. While laminar flow is governed by smooth, parallel layers with minimal mixing, turbulent flow exhibits highly irregular, three-dimensional patterns. This behavior arises due to instabilities in the fluid's velocity profile, and amplifies as the flow velocity increases. Minor disturbances, known as turbulent...
234
Turbulent Flow: Problem Solving01:09

Turbulent Flow: Problem Solving

Carbonation is a process used to dissolve carbon dioxide gas in a liquid, commonly used in the production of carbonated beverages. Achieving efficient carbonation requires careful control of temperature, pressure, and flow conditions. By adjusting these parameters, carbonation efficiency can be maximized, producing a higher concentration of CO2 in the liquid.
Temperature is a key factor in CO2 solubility. In this case, the CO2 gas and the liquid are cooled to 20°C. Lower temperatures...
165
Bernoulli's Equation for Flow Along a Streamline01:30

Bernoulli's Equation for Flow Along a Streamline

Bernoulli's equation relates the energy conservation in a fluid moving along a streamline. The equation applies to incompressible and inviscid fluids under steady flow. For such a flow, Newton's second law is applied to a small fluid element, which experiences forces due to pressure differences, gravity, and velocity variations. The force balance leads to the following form of Bernoulli's equation:
1.1K