Tiered Leak Detection and Repair Programs at Simulated Oil and Gas Production Facilities: Increasing Emission...

Distributions of methane emission rates originating from oil and gas production facilities are highly skewed and span 6-8 orders of magnitude. Traditional leak detection and repair programs have relied on surveys with handheld detectors at intervals of 2 to 4 times a year to find and fix emissions; however, this approach may lead unintended emissions to be active for the same interval independently of their magnitude. In addition, manual surveys are labor intensive. Novel methane detection technologies offer opportunities to further reduce emissions by quickly detecting the high-emitters, which account for a disproportionate fraction of total emissions. In this work, combinations of methane detection technologies with a focus of targeting high-emitting sources were simulated in a tiered approach for facilities representative of the Permian Basin, a region with skewed emission rates where emissions above 100 kg/h account for 40-80% of production site-wide total emissions, which include sensors on satellites, aircraft, continuous monitors, and optical gas imaging (OGI) cameras, with variations on survey frequency, detection thresholds, and repair times. Results show that strategies that quickly detect and fix high-emitting sources while decreasing the frequency of OGI inspections, which find the smaller emissions, achieve higher reductions than quarterly OGI and, in some cases, reduce emissions further than monthly OGI.