Biomechanical gait analysis for a hip disarticulation prosthesis: power source for the swing phase of a hip...

[Purpose] This study aimed to clarify the power source for the swing phase of a hip disarticulation prosthetic limb using biomechanical gait analysis. [Participants and Methods] In this cross-sectional study, six participants who underwent hip disarticulation and seven healthy adults were recruited. Their gaits were assessed using the three-dimensional motion analysis and four force plates. [Results] From pre-swing to initial swing, the angle of the lumbar spine's angle changed by 9° from the flexion to extension positions. However, the power of the lumbar spine was <0.003 W/kg for the entire gait cycle. The peak value of joint moment and hip joint power on the unaffected side were 1 nm/kg and 0.7 W/kg, respectively. From pre-swing to initial swing, the prosthetic limb is pushed forward by extension of the hip joint on the intact side, while the spine returns to the flexion direction. [Conclusion] The hip extension force on the unaffected side was the main force responsible for swinging out the prosthesis, not the lumbar vertebrae's force.