Design theory of compact power divider with reconfigurable power division and negative group delay characteristics

This article presents the combined analysis of reconfigurable power division and negative group delay (NGD) in a power divider. A novel composite transmission line based reconfigurable power divider with high power division ratio, variable negative group delay, and lower characteristic impedance is presented in this work. The impedance transformation in composite transmission lines control both negative group delay and power division. This power divider possesses a wide range of power division ratios from 1 to 39, adequate isolation, impedance matching, and NGD of [Formula: see text] ns to [Formula: see text] ns in the reconfigurable transmission path. The negative group delay is achieved without using any additional group delay circuits. Theoretical equations corresponding to the low characteristic impedance of the transmission line sections and that of isolation elements are derived. The measurement results justify the attainment of high tuning of the power division ratio and negative group delay. Isolation and return loss are higher than - 15 dB at the centre frequency of 1.5 GHz. The significant contributions of this design can be listed as the wide reconfigurable power division along with negative group delay and reduced size.