Designing Highly Photoactive Hybrid Aerogels for In-Flow Photocatalytic Contaminant Removal Using Silica-Coated...

This study explores the use of silica-coated bacterial nanocellulose (BC) scaffolds with bulk macroscopic yet nanometric internal pores/structures as functional supports for high surface area titania aerogel photocatalysts to design flexible, self-standing, porous, and recyclable BC@SiO₂-TiO₂ hybrid organic-inorganic aerogel membranes for effective in-flow photo-assisted removal of organic pollutants. The hybrid aerogels were prepared by sequential sol-gel deposition of the SiO₂ layer over BC, followed by coating of the resulting BC@SiO₂ membranes with a porous titania aerogel overlayer of high surface area using epoxide-driven gelation, hydrothermal crystallization, and subsequent supercritical drying. The silica interlayer between the nanocellulose biopolymer scaffold and the titania photocatalyst was found to greatly influence the structure and composition, particularly the TiO₂ loading, of the prepared hybrid aerogel membranes, allowing the development of photochemically stable aerogel materials with increased surface area/pore volume and higher photocatalytic activity. The optimized BC@SiO₂-TiO₂ hybrid aerogel showed up to 12 times faster in-flow photocatalytic removal of methylene blue dye from aqueous solution in comparison with bare BC/TiO₂ aerogels and outperformed most of the supported-titania materials reported earlier. Moreover, the developed hybrid aerogels were successfully employed to remove sertraline drug, a model emergent contaminant, from aqueous solution, thus further demonstrating their potential for water purification.