Related Experiment Video
Updated: Jul 31, 2025

Transmission of Multiple Signals through an Optical Fiber Using Wavefront Shaping
Published on: March 20, 2017
High security optical OFDM transmission scheme with four-dimensional region joint encryption based on power division
Abstract:
In this paper, a high security chaotic encryption scheme for orthogonal frequency division multiplexing (OFDM) transmission system is proposed by using power division multiplexing (PDM) technology and four-dimensional region joint encryption. The scheme uses PDM to realize simultaneous transmission of multiple user information, which can achieve a good compromise among system capacity, spectral efficiency and user fairness. In addition, bit cycle encryption, constellation rotation disturbance (CRD) and region joint constellation disturbance (RJCD) are used to realize four-dimensional region joint encryption, effectively improving the physical layer security. The masking factor is generated by the mapping of two-level chaotic systems, which can enhance the nonlinear dynamics and improve the sensitivity of encrypted system. A 11.76 Gb/s OFDM signal transmission over 25 km standard single-mode fiber (SSMF) is experimentally demonstrated. At the forward-error correction (FEC) bit error rate (BER) limit -3.8×10-3, the proposed receiver optical power based on quadrature phase shift keying (QPSK) without encryption, QPSK with encryption, variant-8quadrature amplitude modulation (V-8QAM) without encryption and V-8QAM with encryption are about -13.5dBm, -13.6dBm, -12.2dBm, and -12.1dBm. The key space is up to 10128. The results show that this scheme not only improves the security of the system and the ability to resist attackers, but also improves the system capacity and has the potential to serve more users. It has a good application prospect in the future optical network.
Related Concept Videos
Maximum Power Transfer
By substituting the entire circuit with...
IR Frequency Region: X–H Stretching
Discrete-time Fourier transform
One of the notable...
The Maximum Power Transfer Theorem
The load connected draws the current, and the circuit delivers the power to the load. The alternating current flowing through the load is determined using the rectangular form of voltages, currents, network impedance, and load impedance. The average power delivered to the load is obtained from the product of the square of current and load resistance.
¹³C NMR: Distortionless Enhancement by Polarization Transfer (DEPT)
Power Factor Correction

