Catalytic Deactivation and Regeneration of Nickel Microparticles in a Home-Built Microchannel-Coupled Millireactor:...

Substrate-assisted product desorption often proposed in heterogeneous catalysis (nanozymes) denounces the catalytic deactivation of these catalysts. On the contrary, the catalytic deactivation of rigid heterogeneous catalyst becomes noticeable in a continuous flow reactor. Surprisingly, it has been addressed inadequately and in an isolated manner. In this study, we have developed a cost-effective non-lithographic method for the fabrication of a PDMS-based microchannel-coupled-millreactor. Immobilized nickel particles are resistant to leaching in the flow process. During continuous operation, millireactors show a strong catalytic activity for reduction of resazurin and p-nitrophenol with a conversion rate of almost 100 %. Catalytic poisoning is ubiquitous and gets gradually prominent whereas complete catalytic deactivation of magnetic Ni-microparticles is found to be an instantaneous process. Relatively large-sized resorufin binds predominantly to the surface and thereby blocks the access of the substrate to the Ni-particles. The dissociations of product molecules - resorufin and p-aminophenol are the rate-limiting steps that caused the abrupt deactivation of Ni-microparticle. The kinetic mechanism of heterogeneous derived from the Langmuir-Hinshelwood mechanism satisfactorily explains the catalytic poisoning and deactivation of nickel microparticles. This study sheds light on the intricacies of catalytic activity and poisoning of magnetic nickel microparticles.