Influence of oil and gas exploration and production waste on municipal solid waste hydraulic conductivity

This study evaluated the effects of addition of oil and gas exploration and production wastes (E&PW) on hydraulic behavior of municipal solid waste (MSW). A series of laboratory experiments were conducted to assess the impacts of vertical stress, waste composition, mixture ratio of MSW to E&PW based on total mass (e.g., 20% MSW + 80% E&PW), and mixing methods on hydraulic conductivity. Hydraulic conductivity (k) for MSW-E&PW mixtures with 20% and 40% E&PW contents reduced from 3 × 10^-5 m/s to 10^-7 m/s as vertical stress increased from 0 to 400 kPa. An increase in the mixture ratio above 60% resulted in an additional order-of-magnitude decrease in k to 10^-8 m/s as vertical stress increased above 200 kPa. The addition of E&PW did not impact the available flow path, even though adding E&PW to MSW reduced the void spaces. This indicated that the waste matrix is capable of accepting E&PW while keeping the flow structure within the waste matrix. However, for vertical stress greater than 50 kPa, mixtures of MSW + 80% E&PW were observed to yield hydraulic conductivity < 10^-9 m/s.