Related Experiment Videos
Abstract:
An in vitro system has been developed that mimics the passage of erythrocytes from the bone marrow to the circulation. Bone marrow egress and its proper regulation are vital physiologic processes. However, because of the inaccessibility of the marrow, it is difficult to evaluate the various factors important in controlling these processes or even to define the precise mechanism by which egress occurs. The in vitro system has been designed to evaluate the importance of different physical parameters in regulating egress. It consists of a thin silicon wafer (thickness approximately equal to 1.0 micron) cemented over the tip of a large (15.0 micron ID) micropipette. The wafer contains a single circular pore. Cells were observed under the microscope as they passed through the pore under controlled pressures. The rate and duration of passage were obtained from videorecordings of the experiment. The measured passage times agreed well with the predictions of a simple analytical model of a cell passing through a thin aperture. The experimental results confirm the conclusion reached from the analysis that the pressures needed to drive a cell through the pore are well within the physiologic range, and the time needed to complete egress is typically less than 1.0 seconds. These results support the hypothesis that erythrocyte egress may be driven by a hydrostatic pressure difference across the pore.