Related Experiment Video
Updated: Jul 29, 2025

Measuring Sub-23 Nanometer Real Driving Particle Number Emissions Using the Portable DownToTen Sampling System
Published on: May 22, 2020
Quantifying traffic-related carbon emissions on elevated roads through on-road measurements
Dan-Ni Lu1, Hong-Di He1, Hong-Mei Zhao1
1Center for Intelligent Transportation Systems and Unmanned Aerial Systems Applications, State-Key Laboratory of Ocean Engineering, School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiao Tong University, Shanghai, 200240, China.
Abstract:
Vehicles generally move smoothly and with high speeds on elevated roads, thereby producing specific traffic-related carbon emissions in contrast to ground roads. Hence, a portable emission measurement system was adopted to determine traffic-related carbon emissions. The on-road measurement results revealed that the instantaneous emissions of CO2 and CO from elevated vehicles were 17.8% and 21.9% higher than those from ground vehicles, respectively. Based on it, the vehicle specific power was confirmed to exhibit a positive exponential relationship with instantaneous CO2 and CO emissions. In addition to carbon emissions, carbon concentrations on roads were simultaneously measured. The average CO2 and CO emissions on elevated roads in urban areas were 1.2% and 6.9% higher than those on ground roads, individually. Finally, a numerical simulation was performed, and the results verified that elevated roads could deteriorate the air quality on ground roads but improve the air quality above them. What ought to be paid attention to is that the elevated roads present varied traffic behaviour and cause particular carbon emissions, indicating that comprehensive consideration and further balance among the traffic-related carbon emissions are necessary when building elevated roads to alleviate the traffic congestion in urban areas.
Related Concept Videos
Measurement of Air Content in Concrete
The pressure method,...
Elevation of Intermediate Points on Vertical Curves
Design Example: Alignment of a Road Line Using GIS
Rolling Resistance: Problem Solving

