Related Experiment Video
Updated: Jul 28, 2025

Use of Principal Components for Scaling Up Topographic Models to Map Soil Redistribution and Soil Organic Carbon
Published on: October 16, 2018
Two-dimensional (2D) flood analysis and calibration of stormwater drainage systems using geographic information
1Civil Engineering Department, Atatürk University, Erzurum, Türkiye
Abstract:
In recent years, there has been severe flooding in urban areas as well as coastal and river flooding. Urban flooding is exacerbated by climate change, urbanization, growing population, and the increase of impervious surfaces in urban areas. Stormwater drainage systems that discharge stormwater to a safe location in urban areas are becoming increasingly important. The objective of this study is to analyze and calibrate the flood performance of stormwater drainage systems currently used in the central region of Malatya in a potential flood situation using geographic information systems and the InfoWorks ICM. The model was created using the land use type, buildings, and digital elevation model (DEM), and the analysis was performed by exposing stormwater drainage systems to rainfall events of 5, 10, and 15 min of duration for return periods of 2, 5, and 10 years. The model was then validated using field-observed rainfall and flood data and its performance was evaluated using R2, NSE, RMSE, and MAE metrics. The results showed that the eight stormwater drainage systems currently in operation cannot fully convey stormwater and may pose a risk of loss of life and property in residential areas. In addition, the severity of the flooding was found to increase with an increasing return period.
Related Concept Videos
Design Example: Analyzing Capacity Contours for Flood Risk Assessment
Applications of GIS: Disaster Management and Emergency Response
Design Example: Alignment of a Road Line Using GIS
Manipulation and Analysis
Design Example: Creating a Hydraulic Model of a Dam Spillway
Selected Data About Geographic Locations

