Experimental study on radon retardation effect of modular covering floats in radon-containing water

Radon-containing water bodies in uranium mining areas inevitably release radon gas, polluting the surrounding environment via radiation. Thus, it is particularly important to develop devices with the ability to retard the radon release from such water bodies. Based upon theories of radon exhalation in water, a radon exhalation retardation device (RERD) with flexible, modular floats (a flexible polyvinyl chloride material module that floats on water) was designed and manufactured. To study the modular surface-covering floats' effectiveness in retarding radon release from water surfaces, an experimental setup was constructed to simulate radon release from water bodies, using a granular uranium ore sample from a uranium mine as sediment material. Closed-loop measurements were taken to determine the radon exhalation rate on the exposed surface of the water in uncovered and covered conditions. Radon retardation rates were also compared for different area coverage (29.6%, 59.1%, and 88.7%) and immersion depths (0.02 m and 0.04 m) in unperturbed and perturbed water bodies. The results show that: 1) the greater the area coverage, the greater the radon retardation rate in both unperturbed and perturbed water bodies; 2) under the same coverage conditions, the surface radon exhalation rate and the radon transfer velocity at the gas-liquid interface of the perturbed water are larger than those of the unperturbed water; 3) The immersion depth of modular surface-covering floats has a stronger effect on the radon retardation rate in unperturbed water bodies than in perturbed water bodies. The study shows that the proposed modular floats are effective in retarding radon release from both perturbed and unperturbed water bodies.