3D-Printed Piezoelectric Scaffolds with Shape Memory Polymer for Bone Regeneration

The application of piezoelectric nanoparticles with shape memory polymer (SMP) to 3D-printed piezoelectric scaffolds for bone defect repair is an attractive research direction. However, there is a significant difference in dielectric constants between the piezoelectric phase and polymer phase, limiting the piezoelectric property. Therefore, novel piezoelectric acrylate epoxidized soybean oil (AESO) scaffolds doped with piezoelectric Ag-TMSPM-pBT (ATP) nanoparticles (AESO-ATP scaffolds) are prepared via digital light procession 3D-printing. The Ag-TMSPM-pBT nanoparticles improve the piezoelectric properties of the AESO scaffolds by TMSPM covalent functionalization and conductive Ag nanoparticles. The AESO scaffolds doped with 10 wt% Ag-TMSPM-pBT nanoparticles (AESO-10ATP scaffolds) exhibit promising piezoelectrical properties, with a piezoelectric coefficient (d33) of 0.9 pC N^-1 and an output current of 146.4 nA, which are close to the piezoelectric constants of bone tissue. In addition, these scaffolds exhibit good shape memory function and can quickly recover their original shape under near-infrared (NIR) light irradiation. The results of osteogenesis capability evaluation indicate that the AESO-10ATP scaffolds can promote osteogenic differentiation of BMSCs in vitro and bone defect repair in vivo, indicating the 3D-printed AESO-10ATP piezoelectric scaffolds may have great application potential for bone regeneration.