Preparation of blue fluorescent copper nanoclusters for sensitive and selective sensing of apigenin in pharmaceutical...

One-pot means was performed for the rapid preparation of copper nanoclusters (Cu NCs), which were employed as a fluorescence system for the sensitive apigenin measurement in pharmaceutical samples. Herein, CuCl2 aqueous solution was reduced to Cu NCs through ascorbic acid and the Cu NCs were protected through trypsin under 65 ℃ for 4 h. The entire preparation process was rapid, facile and environmentally friendly. The trypsin-capped Cu NCs were demonstrated through ultraviolet-visible spectroscopy, fluorescence spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy and fluorescence lifetime, respectively. The Cu NCs revealed blue fluorescence with emission wavelength around 465 nm under the excitation wavelength of 380 nm. The fluorescence weakening feature of Cu NCs with apigenin was observed. On this basis, a facile and sensitive turn-off fluorescent nanoprobe for the sensing of apigenin in real samples was developed. The logarithm of relative fluorescence intensity revealed a good linear relationship with apigenin contents from 0.5 μM to 300 μM with the detection limit of 0.079 μM. The Cu NCs-based fluorescent nanosensor have been employed to measure the apigenin amounts in real samples such as medical saline, bovine and human serum. The results revealed excellent potential of this Cu NCs-based fluorescent nanoprobe for the convention computation of apigenin amounts in real samples.